A2 WiFi Pico Access Point/Bridge Multiple operating modes allowed: AP, bridge, repeater mode or CPE 2x2 MIMO for both 2.4GHz (802.11bgn) and 5GHz (802.11an) radios Fill-in coverage area in challenging RF environment IP-67 rated carrier grade 802.11b/g/n AP for both outdoor and indoor applications Light-weight with built-in lightning protection The Altai A2 WiFi Access Point/Bridge is designed to be used in Altai Super WiFi systems to increase system capacity, extend coverage, fill-in areas of low or blocked signals caused by obstructions and bridge wirelessly to remote site. It is capable of providing the highest possible data throughput and capacity that the 802.11n standards can offer, and at the same time is backward compatible to standard 802.11a/b/g. As system capacity needs to increase, the A2 Access Point/ Bridge can be used to double the user capacity. The A2 can be installed exactly where the capacity requirement is the greatest. This will create even greater savings compared to other competitive systems. The A2 Access Point/Bridge has both a high capacity 2.4 GHz (2x2 802.11bgn) broadcast radio and a 5 GHz (2x2 802.11an) backhaul radio to enable it to function not only to expand in-system capacity but also to extend the range of a WiFi system. Being equipped with a built-in 5 GHz backhaul radio, the A2 can be connected directly to an A8 5 GHz bridge radio to create a high capacity WiFi system.

   اضافة تعليق او سؤال

الاسم, اسم العائلة

الهاتف:

(لن يعرض للزوار)

البريد الالكتروني:

(لن يعرض للزوار)

الموضوع:

  التعليقات
no comments