متجر الشبكات اللاسلكية

HG4958DP-30D

2012-04-16 19:44:42

The HyperGain model HG4958DP-30D is a high performance broadband dual polarized solid dish antenna. Because of its' superb electrical performance and mechanical stability, the parabolic dish antenna can be used in a wide variety of high performance 4.9GHz and 5GHz range (5.1/5.3/5.4/5.8GHz) wireless applications. The wide band design of this antenna eliminates the need to purchase different antennas for each frequency. This simplifies installations since the same antenna can be used for a wide array of wireless applications. This antenna features 28 - 30 dBi of gain with a 4.8° horizontal beam-width and 4.9° vertical beam-width. Dual Polarization The HG4858DP-30D features a dual polarity feed system. It is fed via two N-Female ports, one for vertically polarized and one for horizontally polarized signals. This feature makes it ideal for MIMO/802.11n and polarization diversity systems. Rugged and Weatherproof The reflector dish of the HG4958DP-30D is constructed from high quality aluminum which gives it superior strength. The dish is coated in a light gray UV-inhibited polymer for durability and aesthetics. The small diameter of the dish helps minimize wind loading. The HG4958DP-30D is supplied with a tilt and swivel mast mount kit. This allows installation at various degrees of incline for easy alignment. It can be adjusted up or down from 0° to 30°.

HG4958DP-34D

2012-04-16 19:43:54

The HyperGain model HG4958DP-34D is a high performance broadband dual polarized solid dish antenna. Because of its' superb electrical performance and mechanical stability, the parabolic dish antenna can be used in a wide variety of high performance 4.9GHz and 5GHz range (5.1/5.3/5.4/5.8GHz) wireless applications. The wide band design of this antenna eliminates the need to purchase different antennas for each frequency. This simplifies installations since the same antenna can be used for a wide array of wireless applications. This antenna features 31 - 34 dBi of gain with a 3.3° horizontal beam-width and 3.3° vertical beam-width. Dual Polarization The HG4858DP-34D features a dual polarity feed system. It is fed via two N-Female ports, one for vertically polarized and one for horizontally polarized signals. This feature makes it ideal for MIMO/802.11n and polarization diversity systems. Rugged and Weatherproof The reflector dish of the HG4958DP-34D is constructed from high quality aluminum which gives it superior strength. The dish is coated in a light gray UV-inhibited polymer for durability and aesthetics. Perforated holes in the dish helps minimize wind loading. The HG4958DP-34D is supplied with a tilt and swivel mast mount kit. This allows installation at various degrees of incline for easy alignment. It can be adjusted up or down from 0° to 30°.

ARC-PA5823B01

2012-04-16 19:42:13

Standalone Panel Antenna 4.94-5.875 GHz 19dBi & 5.15-5.875 GHz 23dBi • Broadband design covers entire 5GHz frequency band, plus also operates in the 4.9GHz public safety band • High performance, cost effective patented circuit design • US Engineered • Manufactured under strict US quality control procedures • Low profile and rugged design for outdoor use with UV stabilized plastic • Articulating wall/pole bracket (BRA-A-1699-02) included • Custom designs available

FSD-804P

2012-04-16 19:40:27

Cost effective centralized power distribution For cost saving and flexible using of PoE power provision, half of the 10/100Mbps TP ports of FSD-804P provide PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices. For SOHO or department network, the switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging Ethernet to Fast Ethernet workgroups or networks. Easy Cabling Installation With data and power over Ethernet from one unit, the FSD-804P shall reduce cables and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. We are also proud of the key feature – energy saving. With more efficient switching power supply, the efficiency of the FSD-804P would be much better than four linear power adapters in a long run. Providing 4 PoE interfaces, the FSD-804P is ideal for small business and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost effective.

FSD-808P

2012-04-16 19:39:10

Centralized Power Distribution for Ethernet Networking To fulfill the demand of sufficient PoE power for Fast Ethernet network applications, PLANET introduces a new member in the 802.3af PoE Switch family - FSD-808P, the 8-Port 10/100Mbps 802.3af PoE Switch. The FSD-808P supports 125 Watts PoE budget and 8-Port 802.3af PoE power injector function to drive 8 IEEE 802.3af compliant powered devices. The FSD-808P also provides a simple, cost-effective, and non-blocking wire-speed performance with 12-inch metal shape for desktop deployment in compact housing, SOHO office or department network applications. Easy Network Construction by PoE Function Providing 8 IEEE 802.3af PoE interfaces, the FSD-808P is ideal for small business and workgroups to deploy the PoE network for the wireless access points, IP-based surveillance camera or IP phones in any places easily and efficiently. The PoE in-line power following the IEEE 802.3af standard makes the FSD-808P able to power on 8 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. With data and power over Ethernet from one unit, the FSD-808P shall reduce the need for extension cords and dedicated electrical outlets on the wall, ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort.

Tube-U

2012-03-23 20:09:34

Tube-U (N) Tube-U(N) is the long-range wireless 802.11b/g/n outdoor USB CPE with 5M usbcable. Tube-U(N) provides users to launch IEEE 802.11n wireless network at 150 Mbps in the 2.4GHz frequency, which is also compatible with IEEE 802.11b/g/n wireless devices at maximum 150Mbps. You can easy to install and enjoy the internet connection by just simply plug USB into the Notebook and Desktop. Tube-U(N) also includes a convenient Utility for scanning available networks and saving preferred networks that users usually connected with. Security encryption can also be configured by this utility.

solo48N

2012-03-23 19:36:27

SoLo48N 802.11a/b/g Long-Range Outdoor AP/CPE 18dBi 5GHz Antenna + N type Antenna connector

G2

2012-03-23 19:33:14

Feature : Compliant with IEEE 802.11b/g standard for 2.4GHz wireless LAN Support Bridge, Routing, WISP functions between wireless and wired Ethernet interface Support 64-bit and 128-bit WEP, WPA, WPA2, encryption/decryption and WPA with Radius Support IEEE802.1x Authentication, IAPP, WDS Support DHCP server to provide clients auto IP addresses assignment and DHCP client static IP, PPPoE, PPTP of WAN interface Support firewall security with port filtering, MAC filtering, port forwarding, trigger port and DMZ hosting functions

solo51

2012-03-23 19:30:32

Feature : Complies with IEEE 802.11b/g standard for 2.4GHz Wireless LAN. Support 64-bit and 128-bit WEP, WPA, WPA2, encryption/decryption and WPA with Radius. Support Wirleess WAN for client mode to connect to the Base-Station and NAT for Ethernet to Computer or Switch Support UPnP for automatic Internet access and Dynamic DNS service. Supports firmware upgrade function via Web

AirMax Sector 5G-16-120

2012-03-23 19:14:54

AirMax Sector 5G-16-120 Mid-Gain 16dBi, 120 deg. AirMax 5GHz Carrier Class Sector 2x2 MIMO Antennas 5GHz AirMax 2x2 MIMO Basestation Sector Antennas Revolutionary, Cost/Performance Breakthrough Carrier Class MIMO BaseStation Antennas

AirMax Sector 5G-20-90

2012-03-23 19:02:02

AirMax Sector 5G-20-90 Hi-Gain 20dBi, 90 deg. AirMax 5GHz Carrier Class Sector 2x2 MIMO Antennas 5GHz AirMax 2x2 MIMO Basestation Sector Antennas Revolutionary, Cost/Performance Breakthrough Carrier Class MIMO BaseStation Antennas

AirMax Sector 2G-15-120

2012-03-23 19:07:07

MIMO Antennas 2.4GHz AirMax 2x2 MIMO Basestation Sector Antennas Revolutionary, Cost/Performance Breakthrough Carrier Class MIMO BaseStation Antennas

AMO-5G13

2012-03-23 18:57:36

AirMax Omni is a Carrier Class 2x2 Dual Polarity MIMO omnidirectional antenna that was designed to seamlessly integrate with Rocket M radios (Rocket M sold separately). Rocket M combines the “brains” in one robust unit; just pair Rocket M with AirMax Omni to create powerful 360° omnidirectional basestation. This seamless integration gives network architects unparalleled flexibility and convenience. On the right is one example of how AirMax Omni can be deployed: -Internet Backbone -ISP Network -RocketDish with Rocket M (PtP backhaul) -RocketDish with Rocket M (PtP backhaul) -AirMax Omni with Rocket M (PtMP) -Corporate campus with NanoBridge M clients -Mobile computer with AirGrid M client

AMO-2G13

2012-03-23 18:39:53

FNSW-1600P

2012-03-21 21:28:16

Centralized Power Distribution for Ethernet Networking To fulfill the demand of sufficient PoE power for network applications with 10/100Mbps wire speed transmission, PLANET introduces a new member in the 802.3af PoE Fast Ethernet Switch family – FNSW-1600P, the 16-Port 10/100Mbps 802.3af Power over Ethernet Switch with 125 Watts PoE budget. The 16 Fast Ethernet ports integrated with 802.3af PoE injector function are able to drive at least 9 x IEEE 802.3af 12.95Watts Class 3 compliant powered devices. The FNSW-1600P also provides a simple, cost-effective, and non-blocking wire-speed performance with 19-inch metal shape for deployment in compact housing, SOHO office or department network application. Great Ethernet Traffic Transmission Ability The FNSW-1600P features high performance switch architecture capable of providing the non-blocking 3.2Gbps switch fabric and wire-speed throughput as high as 2.38Mpps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Besides, the 802.3x Full-Duplex flow control function of the FNSW-1600P enables PD devices and servers directly connect to the Switch for wire-speed packet transfer performance without risk of packet loss. Easy and Cost-effective Network Deployment With data and power over Ethernet from one unit, the FNSW-1600P shall reduce the need of cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 125 Watts Power Budget, the FNSW-1600P is ideal for small business and workgroups deploying the PoE for the wireless access points, IP surveillance cameras and IP phones in any places easily and efficiently.

FNSW-2400PS

2012-03-21 21:27:49

Cost-effective Edge Network Connection Solution To provide enhanced network management with cost saving benefit to customers, PLANET releases the new version of the FNSW-2400PS, the Layer 2 Web Smart Switch with PoE injector function. The FNSW-2400PS is equipped with 24 Fast Ethernet ports integrating with PoE injector function. With 125Watts PoE power budget, it provides a compact, affordable, safe and reliable power solution for small to medium enterprises. IEEE 802.3af Power over Ethernet Support The PoE in-line power following the IEEE 802.3af standard makes the FNSW-2400PS able to deliver power to 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. It optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and IP Surveillance cameras.With more efficient switching power supply, the efficiency of the FNSW-2400PS would be much better than four linear power adapters in a long run and bring customers the key benefit – energy saving. Easy Cabling Installation The Power over Ethernet technology enables the Ethernet wire to carry both data and power. With data and power over Ethernet from one unit, the FNSW-2400PS shall reduce cable installation and eliminate the need for extension cords or dedicated electrical outlets on the wall, ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort. Friendly Web-Based Management For efficient management, the FNSW-2400PS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, VLAN, Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, port trunk, QoS, bandwidth control, and MAC address / TCP & UDP filter. The FNSW-2400PS provides Port-Based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allowed on the FNSW-2400PS will be maximally up to 24 for port based or up to 32 for IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group. Via supporting port trunking, the FNSW-2400PS allows the operation of a high-speed trunk combining multiple ports. The FNSW-2400PS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk group.

POE-1200

2012-03-21 21:27:34

Quick and Easy PoE Network Deployment The PLANET POE-1200 is a 12-Port IEEE 802.3af Power over Ethernet injector hub and complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. With 12 10/100Base-TX Fast Ethernet ports, this device supports full 48VDC power for any remote IEEE 802.3af powered device (PD) like Wireless LAN Access Point, IP phone, and IP Camera. Supporting power supply of 110 watts, POE-1200 provides sufficient power to 12 remote PD devices. The POE-1200 is installed between a regular Ethernet Switch and the powered devices, injecting power without affecting the data transmission. It offers a cost effective and quick solution to upgrade network system to IEEE 802.3af Power over Ethernet system without replacing the existing Ethernet Switch. Easy Cabling Installation There are 24 RJ-45 STP ports on the front panel of Hub, in which the 12 ports on the lower stack function as "Data input" and the other 12 ports on the upper stack function as "Data and Power output". Each of the "Data and Power output" port on the upper stack operates as an power injector which transmits DC Voltage to the CAT 5 cable to transfer data and power simultaneously between the Injector and Splitter. Friendly / Simple Web Management Interface To efficiently manage the powered devices, POE-1200 provides Web management interface in which administrators can use the functions including port Enable / Disable, port priority, system configuration, and Username / Password changing and with smart features for powered device. The PoE injector hub can auto detect the power status of each port and show massages on its Web management interface. These features also provide a cost-effective way to manage the devices via Internet whenever you are at work or at home.

EAP150

2012-03-17 22:02:29

EAP150 is a 150Mbps wireless-n ceiling mount AP which offers users extended coverage, strong penetration, secure network management and simple connection. It provides extended coverage and at least 3 floors penetration in your environment. MSSID + VLAN make your data more secure and easy management. Standard PoE interoperable with 802.3af makes internet connection more flexible. EAP150 is designed as a Ceiling mount AP which will not violate your interior decoration. Only 3-step setup makes setting up simpler. EAP150 is the perfect choice for home and small business.

EAP300

2012-03-17 22:01:29

EAP300 is a 300Mbps wireless-n ceiling mount AP which offers users extended coverage, strong penetration, secure network management and simple connection. It provides extended coverage and at least 3 floors penetration in your environment. MSSID + VLAN make your data more secure and easy management. Standard PoE interoperable with 802.3af makes internet connection more flexible. EAP300 designed as a Ceiling mount AP which will not violate your interior decoration. Only 3-step makes setting AP up simpler. EAP300 is the perfect choice for home and small business.

U1

2012-03-17 21:48:27

U1 Super WiFi USB Client Extend outdoor WiFi coverage of Altai Super WiFi System into indoor areas Features built-in for carriers including client performance statistics With powerful built-in antennas, the U1 WiFi client can be used to improve the link budget by as much as 16 dB The best data transmission rate and throughput available by using 802.11b/g/n radio Powered by laptop using an external USB cable

C1

2012-03-17 21:49:47

C1 WiFi CPE Extend outdoor coverage of A8 series Super WiFi Base Station into indoor Features built-in for carriers including per client/VAP bandwidth control, remote web-based management and client performance statistics Improve signal strengthfor both NLOS and LOS coverage areas One piece weatherproof chassis complaint to IP55 standard for direct outdoor installation The Altai C1 WiFi CPE is designed as an essential component in the Altai Super WiFi system to extend outdoor WiFi coverage into indoor areas for broadband connectivity. The Altai C1 employs patented smart signal processing algorithms and antenna design to increase WiFi signal strength (transmit and receive) as well as the client’s throughput in areas covered by an A8/A8-Ei/A8i Super WiFi Base Station. It enables network operators to take advantage of the cost savings provided by the A8 series Super WiFi Base Station’s 10X greater coverage area when initially installing the WiFi system. With powerful built-in antennas, the C1 WiFi CPE can be used to improve the link budget by as much as 16 dB. The C1 can be installed exactly where the signal strength requirement is the greatest. This allows an increase in the coverage distance from the A8 series base station substantially and provides greater flexibility and savings compared to the initial WiFi coverage provided by the A8 alone.

A2

2012-03-17 21:51:58

A2 WiFi Pico Access Point/Bridge Multiple operating modes allowed: AP, bridge, repeater mode or CPE 2x2 MIMO for both 2.4GHz (802.11bgn) and 5GHz (802.11an) radios Fill-in coverage area in challenging RF environment IP-67 rated carrier grade 802.11b/g/n AP for both outdoor and indoor applications Light-weight with built-in lightning protection The Altai A2 WiFi Access Point/Bridge is designed to be used in Altai Super WiFi systems to increase system capacity, extend coverage, fill-in areas of low or blocked signals caused by obstructions and bridge wirelessly to remote site. It is capable of providing the highest possible data throughput and capacity that the 802.11n standards can offer, and at the same time is backward compatible to standard 802.11a/b/g. As system capacity needs to increase, the A2 Access Point/ Bridge can be used to double the user capacity. The A2 can be installed exactly where the capacity requirement is the greatest. This will create even greater savings compared to other competitive systems. The A2 Access Point/Bridge has both a high capacity 2.4 GHz (2x2 802.11bgn) broadcast radio and a 5 GHz (2x2 802.11an) backhaul radio to enable it to function not only to expand in-system capacity but also to extend the range of a WiFi system. Being equipped with a built-in 5 GHz backhaul radio, the A2 can be connected directly to an A8 5 GHz bridge radio to create a high capacity WiFi system.

B5

2012-03-17 21:51:10

Altai B5 PTP Wireless Bridge B5 is designed to be used in Altai Super WiFi systems to provide carrier-grade ultra long range and high throughput point-to-point backhaul bridging Configurable 4.9 to 5.8 GHz frequency band Possible operational distances in excess of 80 km. The Altai B5 Wireless Bridge is designed to be used in Altai Super WiFi systems to provide carrier-grade ultra long range and high throughput backhaul bridging. The Altai B5 is a wireless Point-to-Point solution which combines high-speed capability, up to 240 Mbps throughput, with a rich set of best-in-class features and benefits such as leading-edge radio protocols providing unrivalled spectral efficiency and wireless transmissions over distances in excess of 80 km.

RB800

2012-03-11 12:41:00

The RB800 is an advanced high performance wireless platform. It has four miniPCI slots, three Gigabit ethernet ports, two daughterboard connectors (one PCI and one PCI-e), a miniPCI-e slot and a compact flash slot. The two daughterboard connectors allow you to expand the number of wired and wireless ports, and the new high power CPU is capable of supporting them all. This is the new definition of wireless networking power. Combined with RouterOS - RB800 is the most powerful and sophisticated wireless router, firewall and bandwidth manager. With many expansion options.

RB750

2012-03-11 12:40:25

An entirely new class of product in the RouterBOARD lineup, the RB750 is a small five port ethernet router in a nice plastic case. Not only is this an attractive looking tiny SOHO unit, it’s price is lower than the RouterOS license alone - there simply is no choice when it comes to managing your wired home network, the RB750 has it all. Not only it’s affordable, small, good looking and easy to use - It’s probably the most affordable MPLS capable router on the market. No more compromise between price and features - RB750 has both. With it’s compact design and clean looks, it will fit perfectly intoany SOHO environment. Box contains: RB750, plastic case, power supply

RB750UP

2012-03-11 12:39:59

RB750UP is a small five port ethernet router in a nice plastic case, the UP model includes a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about. Max current is 500mA per port, Ethernet ports are shielded. It is affordable, small, good looking and easy to use - It’s probably the most affordable MPLS capable router on the market. No more compromise between price and features - RB750 series has both. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment. Box contains: RB750UP, plastic case, 24v 2.5A power adapter

RB750GL

2012-03-17 19:23:48

The RB750GL is a small SOHO router in a white plastic case. It has five independent Gigabit Ethernet ports and optional switch chip functionality for wire speed Gigabit throughput. It’s probably the most affordable MPLS capable Gigabit router on the market and now it is even more affordable than before. Compared to the previous model, the RB750GL has almost the same performance, but is significantly lower cost. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment. Box contains: RB750GL, plastic case, power adapter

RB751U-2HnD

2012-03-11 12:38:06

The RB751U-2HnD is the wireless SOHO AP you have been waiting for. It has five Ethernet ports, one USB 2.0 port and a high power 1W 802.11b/g/n wireless AP with antennas built in. It’s also possible to connect an external MMCX antenna to replace one of the built in antennas. The device is very small and will look good in any home or office, wall mounting anchor holes are provided. Package contains RB751U-2HnD in a plastic case and power adapter.

RB751G-2HnD

2012-03-11 12:37:26

The RB751G is the wireless SOHO Gigabit AP you have been waiting for. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 30dBi/1W 802.11b/g/n wireless AP with antennas built in. It’s also possible to connect an external MMCX antenna to replace one of the built in antennas. The device is very small and will look good in any home or office, wall mounting anchor holes are provided. Package contains RouterBOARD 751G-2HnD in a plastic case and power adapter. RB751G-2HnD will be available in United States through our Distributor network when FCC certification will be ready, hopefully by the end of March.

RB1200

2012-03-11 12:36:52

The new and affordable rackmount router. It has ten individual gigabit Ethernet ports, five of them can be connected together in one 5-port switch group. RB1200 has a SODIMM slot with bundled 512MB of RAM, a beeper and a serial port. It has no moving parts and it’s operation is completely silent. The RB1200 comes in a 1U aluminium rackmount case and power supply

RB1100AH

2012-03-11 12:36:02

RB1100AH This device is a high performance 1U rackmount Gigabit Ethernet router. It has thirteen individual gigabit Ethernet ports, two 5-port switch groups, and includes Ethernet bypass capability. RB1100AH also has a SODIMM slot with bundled 2GB of RAM, one microSD card slot, a beeper and a serial port. Up to half a million packets per second and more than 3Gbit throughput possible! The RB1100AH comes preinstalled in a 1U aluminium rackmount case, with power supply and power plug, assembled and ready to deploy.

RB1100AHx2

2012-03-11 12:32:09

This device is our best performance 1U rackmount Gigabit Ethernet router- With a dual core CPU, it can reach up to a million packets per second! It has thirteen individual gigabit Ethernet ports, two 5-port switch groups, and includes Ethernet bypass capability. 2GB of SODIMM RAM are included, there is one microSD card slot, a beeper and a serial port. The RB1100AH comes preinstalled in a 1U aluminium rackmount case, power supply and power plug, assembled and ready to deploy.

OmniTIK U-5HnD

2012-03-11 12:35:27

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 802.11 standard device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput. LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter

SXT 5-HnD

2012-03-11 12:34:44

For Point-to-point with two SXT devices, or as a CPE device for point-to-multipoint. SXT 5HnD is a low cost, high speed 5GHz wireless device. Dual polarization 802.11n and Nv2 TDMA technology help to achieve even 200Mbit real throughput speed. Complete with a ready to mount enclosure and built-in antenna, this is the perfect CPE. - FCC certified! - Solid all-in-one design: quick and easy to mount - Tower friendly one hand enclosure access - 5GHz 802.11a/n wireless on board - One 10/100 Ethernet port - 16dBi (+/- 2) dual chain antenna built-in - Signal strength LED indicators on back - USB 2.0 port, voltage and temperature monitors - Extended L2MTU support to avoid fragmentation overhead in MPLS, QinQ etc Box contains: one SXT unit, PoE injector, 24V power adapter, mounting bracket, metallic mounting loop.

A8

2012-03-17 21:52:48

A8 Super WiFi Base Station World's leading WiFi outdoor base station optimized for maximum coverage with minimal installation sites Enhance outdoor WiFi signal coverage area by 10 times, particularly in non–line–of–sight environment Multiple–radio smart antenna platform supports 360–degree coverage Flexible antenna configuration for different site conditions such as roof-top or towers Support standard 802.11b/g access and 802.11a backhaul

UniFi installer

2012-03-01 20:54:55

ubnt discovery

2012-03-01 20:39:07

ETR-9350

2012-02-27 22:10:54

Sapido RB-1632

2012-04-18 23:15:31

Unifi UAP

2012-03-05 12:27:49

300Mbps speeds, 500ft range The UniFi AP uses a clean industrial design that seamlessly blends into typical environments. The AP's are feature the latest in WiFi 802.11n MIMO technology. All accessories are included to mount the devices either on the wall or ceilings. Also included is Power Over Ethernet (POE) functionality which allows both power and data to be carried over a single Ethernet cable to the device. At the front-center of the device is a status LED ring which can provide the administrator with location tracking and alerts for each device.

APC 2S-20

2012-02-07 19:31:25

APC 2S-14

2012-02-07 19:23:19

ARC-AF-SS-5-EU

2012-02-07 19:02:34

ARC-AF-SS-2-EU

2012-02-07 19:00:56

ARC-AF-SM-5-EU

2012-02-07 18:57:40

ARC-AF-SM-2-EU

2012-02-07 18:58:52

ARC-AF-FS-5-EU

2012-03-17 21:59:13

FreeStation as Office Installation: The FreeStation can be used to receive WAN access through the client radio while offering simultaneous access inside the premise with the built-in WIFI Access Point. FreeStation as Residential Installation: The FreeStation can be used to access the carrier network while repeating network coverage using WIFI at the same timeinside the customer premise. FreeStation as HotZone Coverage: The FreeStation can be used to provide HotZone coverage and c a n s e r v e a s a n e two r k backhaul while simultaneously providing local hotspot access through a dedicated radio.

ARC-AF-FS-2-EU

2012-02-08 10:26:41

ARC-DA5830

2012-02-07 19:05:33

• Industry leading interference rejection design blocks all frequencies below 4.4GHz • Robust Design meets ETSI EN300, EN302, 2003/108/EC and 2002/95/EC specifications • High Port to Port Isolation for Ideal MIMO Performance • Unique mounting feature for ARC enclosures, Ubiquity Rocket, etc. • Maximum gain achieved with 70% aperture efficiency • Dual Polarization (H & V) • Manufactured under strict US quality control proce-dures • Precise alignment achievable with the high strength pole mount bracket. (included) • Optional radome available for improved environmental protection (P/N ARC-RD-2FTABS – Sold Separately)

APC 5M 18

2012-03-17 22:07:19

The APC 5M-18 delivers the highest performance and stability available in the 5 GHz CPE class. This product combines a robust IP-66 compliant enclosure with a highly advanced 802.11n radio core containing MIMO 2x2 technology along with an integrated high gain dual polarization directional antenna (data rate 300 Mbps). The device is powered by a reliable, advanced, and feature-rich operating system, allowing the creation of very high throughput and stable wireless networks quickly, safely, and effectively. In addition, the APC 5M-18 supports access point operating mode which extends application scenarios and makes the APC 5M-18 suited for both point to point and point to multipoint networks.

APC 2Mi

2012-03-17 22:06:10

The APC 2Mi is a small, but robust and high performance 2.4 GHz access point designed for indoor applications. This product is equipped with an extreme output power (up to 30 dBm) 802.11n MIMO radio which allows communicating effectively older 802.11b/g equipment together with latest standards wireless devices. The APC 2Mi is coupled with an advanced and featurerich operating system which allows the product to operate as an access point and as a station at the same time, also act as bridge and as router. (data rate 300 Mbps)

APC 5M 90

2012-03-17 22:07:32

The APC 5M-90 delivers the highest performance and stabilityavailable in the 5 GHz Base Station class class. This productcombines a robust IP-65 compliant enclosure with a highlyadvanced 802.11n radio core containing MIMO 2x2 technologyalong with an integrated high gain dual polarized 90° sector antenna (data rate 300 Mbps). The device is powered by a reliable, advanced, andfeature-rich operating system, allowing the creation of very highthroughput and stable wireless networks quickly, safely, and effectively.In addition, the APC 5M-90 supports client operatingmode which extends application scenarios, but the main advantageof this model is a base station with a professional integratedantenna.

APC 2M 90

2012-03-17 22:09:03

The APC 2M-90 delivers the highest performance and stability available in the 2 GHz Base Station class class. This product combines a robust IP-65 compliant enclosure with a highly advanced 802.11n radio core containing MIMO 2x2 technology along with an integrated high gain dual polarized 90° sector antenna. The device is powered by a reliable, advanced, and feature-rich operating system, allowing the creation of very high throughput and stable wireless networks quickly, safely, and effectively. In addition, the APC 2M-90 supports client operating mode which extends application scenarios, but the main advantage of this model is a base station with a professional integrated antenna. (data rate 300 Mbps)

AOA-2415

2012-03-19 21:56:38

AOA-2415 is designed for the 2.4GHz ISM band, supporting 2.4 to 2.5 GHz and provides superb performance in IEEE 802.11b/g WiFi and Bluetooth applications. AOA-2415 includes mounting bracket and hardware for up to 2”OD masts. Made with fiberglass

POWERBRIDGE M5

2010-11-16 01:22:01

POWERBRIDGE M5 PBM5 Robust, Efficient Mechanical Design PowerBridge packs revolutionary performance in a compact and weatherproof design. Advanced Antenna Technology Super-Efficient 25dBi Dual-Polarity Array Panel Design provides optimum MIMO performance at long distances. Breakthrough Wireless Performance, AirMax and AirControl Support 150+Mbps of real outdoor throughput and up to 20km+ range. PowerBridge M products utilize Ubiquiti\'s revolutionary AirMax TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl application allows operators to centrally manage 100\'s of devices

EUB9603H

2012-03-05 12:38:35

EUB9603H is a revolutionary high power 600mW 802.11n

SoLo48

2012-03-05 12:25:06

SoLo48N 802.11a/b/g Long-Range Outdoor AP/CPE 18dBi 5GHz Antenna + N type Antenna

AG-5G27

2012-03-21 21:24:35

AIRGRID M5 27DBI Patent Pending InnerFeed Antenna Technology Utilizing InnerFeed technology, the new AirGrid M Series represents the evolution of outdoor broadband wireless devices. Complete antenna and radio system integration provides revolutionary cost/performance solutions to the Worldwide Broadband Industry. Robust and Simple Product Design Can be oriented to use either vertical or horizontal polarization. Mechanical design provides complete weatherproof performance. Acitivity and signal strength LED's provided for installers. Enhanced RF and Ethernet ESD/Surge protection enables prolonged operation in harshest environments. Breakthrough Wireless Performance, AirMax and AirControl Support 100+Mbps of real outdoor throughput and up to 30km+ range. AirGrid products utilize Ubiquiti's revolutionary AirMax TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl� application allows operators to centrally manage 100's of devices. AirGrid includes both a PoE injector and a passive adapter. Recommended ethernet cable lengths differ depending on which power supply is used: The passive adapter (POE+USB) will take 5V from any powered USB port. Maximum ethernet cable length is 65 feet (20 meters). The PoE injector (AG-POE-US) is rated at 5Vdc 2A and includes a 6-ft US power cord. Maximum ethernet cable length is 165 feet (50 meters

AG-5G23

2012-03-21 21:33:33

AIRGRID M5 23DBI Patent Pending InnerFeed Antenna Technology Utilizing InnerFeed technology, the new AirGrid M Series represents the evolution of outdoor broadband wireless devices. Complete antenna and radio system integration provides revolutionary cost/performance solutions to the Worldwide Broadband Industry. Robust and Simple Product Design Can be oriented to use either vertical or horizontal polarization. Mechanical design provides complete weatherproof performance. Acitivity and signal strength LED's provided for installers. Enhanced RF and Ethernet ESD/Surge protection enables prolonged operation in harshest environments. Breakthrough Wireless Performance, AirMax and AirControl Support 100+Mbps of real outdoor throughput and up to 30km+ range. AirGrid products utilize Ubiquiti's revolutionary AirMax TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl� application allows operators to centrally manage 100's of devices. AirGrid includes both a PoE injector and a passive adapter. Recommended ethernet cable lengths differ depending on which power supply is used: The passive adapter (POE+USB) will take 5V from any powered USB port. Maximum ethernet cable length is 65 feet (20 meters). The PoE injector (AG-POE-US) is rated at 5Vdc 2A and includes a 6-ft US power cord. Maximum ethernet cable length is 165 feet (50 meters

AOA-5815

2012-03-19 21:56:17

AOA-5815 is designed for the 5.8 GHz ISM band, supporting 5.1 to 5.9 GHz and provides superb performance in IEEE 802.11a WiFi applications. AOA-5815 includes mounting bracket and hardware for up to 2”OD masts. Made with fiberglass

G2

2012-03-05 12:24:45

2Watt Outdoor WISP AP/CPE G2 is the low cost outdoor High-Power WISP AP/CPE which designed for connecting wireless communication devices together from the wireless ISP network, which operates in the 2.4GHz band compliant with IEEE 802.11b/g Standard. G2 supports a data transmission rate up to 54Mbps, with is best suited for Enterprises, or off-site location required LAN or Internet access without effort of networking wired cabling issue. For high level deployment, G2 also supports Power over Ethernet feature to create more wireless backbone networks without the environment limitation. G2 also integrated the 14dBi Panel Antenna which easy to use in Point to Point, Point to multi-Point or CPE applications. It also provides advance security enhancement with up to 128-bit WEP, WPA, WPA2, and MAC Filtering

SoLo51

2012-03-05 12:27:21

SoLo51 Long-Range Low Cost Atheros Outdoor AP/CPE Integrated 14dBi Antenna

RB493

2012-03-21 23:01:02

RB150/RB450/RB450G Indoor case. RouterBOARD not included

RB450 case

2012-03-21 23:07:49

RB150/RB450/RB450G Indoor case. RouterBOARD not included

NS2-Loco

2010-11-16 01:00:19

NanoStation Loco2 NS2L NanoStation Loco provides a breakthrough in cost, reliability, & performance. Features up to 10km of range performance, 25+Mbps of throughput performance, & the powerful, intuitive AirOS by Ubiquiti. NanoStation Loco is the latest innovation in broadband wireless CPE technology from Ubiquiti. Super Efficient Antenna Performance Although approximately half the design of the original Ubiquiti NanoStation, NanoStation Loco still exhibits outstanding antenna performance. NanoStation2 Loco was able to maintain 8dBi of dual-polarity antenna gain in a compact form-factor using a highly efficient and innovative patch array antenna design

NanoStationM5

2010-11-16 00:58:02

NanoStation M5 NSM5 Performance Breakthrough 150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.

ROCKET M5

2010-11-16 00:32:55

The ROCKET M5 is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP Airmax base-station applications

ROCKETDISH 5G-30

2012-03-21 21:14:02

Carrier Class Performance. Breakthrough Price PointsInstantly pair with Rocket M5 to create powerful 2x2 MIMO PtP Bridging applications Rocket mount and weatherproof RF jumpers included

HG2409RD-NF

2012-03-19 21:54:49

HG2409RD-NF * High Performance - 9 dBi * Better performance than most stock AP antennas * Flexible "Rubber Duck" antenna * Tilt and swivel design * N-Female Bulkhead Connector

AWAP02O

2012-03-21 23:05:16

AWAP02O OUTDOOR ENCLOSURE

BM2HP

2010-11-15 21:20:49

• No radio card / host board issues• No RF cable quality concerns• No mechanical stability concerns • No enclosure mounting requirement

BM5HP

2010-11-15 21:16:56

• No radio card / host board issues• No RF cable quality concerns• No mechanical stability concerns • No enclosure mounting requirement

ESR-6670

2009-10-11 20:20:51

ESR6670 is a 3G-enabled 2T2R Wireless-N Router that delivers up to 6x faster speed (300Mbps) and 3x extended coverage than 802.11g devices. With Extreme Session Support (19000 Sessions) users are able to experience the unprecedented performance and smooth network services. This product supports 3G data cards from HuaWei, OPTION, Sierra, BandLuxe and SIMCOM with standards covering WCDMA (HSDPA), CDMA2000 & TD-SCDMA. It is built-in with USB for easy and flexible plug-and-play interface for 3G cards

ECB-1220R

2010-11-15 21:14:48

ECB-1220R is a 2.4GHz 802.11b/g broadband Wi-Fi Router with advanced AP/Client Bridge/Repeater functions. So you could implement this crossover device into three applications AP, Client Bridge and Router mode. With leading edge SoC (System-on-Chip) technology, broadband subscribers will experience lightning speed Internet access, easy local connectivity, rich software application and secure network protection.

ESR6650

2010-11-15 21:11:49

The ESR6650 is a 3G-enabled Wireless-N Router that delivers up to 3X faster speed (150Mbps). It supports 3G data cards from HuaWei, OPTION, Sierra and BandLuxe with standards covering WCDMA (HSDPA), CDMA2000 & TD-SCDMA. The ESR6650 supports home networking with superior throughput and performance and unparalleled wireless range. The easy to use WPS function helps users to connect to wireless device with just one push of a button.

ECB9500

2010-11-15 21:09:55

ECB9500 is a powerful and multi-functioned 11n product with 7 major multi-functions, is designed to operate in every working environment for enterprises.ECB9500 is a Wireless Network device that delivers up to 6x faster speeds and 7x extended coverage than 802.11g devices. ECB9500 supports home network with superior throughput, performance and unparalleled wireless range. With user-friendly WPS function, it helps users to connect to wireless device simply with a one-push button.

RB411A

2012-03-17 19:30:59

RouterBOARD 411A with Atheros 300Mhz CPU, 64MB RAM, one LAN, one MiniPCI, NAND Storage with RouterOS Level 4 (AP support)

RB411

2012-03-17 19:25:44

The RB411 series is designed with size and cost in mind. This small device will fit perfectly into small CPE devices, will host your SOHO AP, or even run your wireless backup link. The powerful Atheros CPU gives it the ability to do all of this and more. The RB411 includes RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RouterBOARD 411 with Atheros 300Mhz CPU, 32MB RAM, one LAN, one MiniPCI, NAND Storage with RouterOS Level 3 (CPE support)

EUB-9701

2012-03-05 12:38:18

EUB-9701 EXT2 Wireless-N USB Adapter implements the latest 11n technology which extremely improves wireless signal for your computer than existing wireless 802.11g technology. The incredible speed of Wireless-N USB adaptor makes heavy traffic networking activities more flexible and takes the wireless into practical road. You could enjoy the racing speed of wireless connection, surfing on Internet without string wires. Adding EnGenius Wireless-N to your Notebook or Computer, it provides an excellent solution for doing media-centric activities such as streaming video, gaming, and enhances the QoS (WMM) without any reduction of performance. It extends 3 times network coverage and boosts 6 times transmission throughput than existing 11g product. For more security-sensitive application, EUB-9701 EXT2 supports Hardware-based IEEE 802.11i encryption/decryption engine, including 64-bit/128-bit WEP, TKIP, and AES. Also, it supports Wi-Fi alliance WPA and WPA2 encryption. Cisco CCX V1.0, V2.0 and V3.0 compliant

EOC-5610

2012-03-05 12:24:14

EOC-5610 is a long range outdoor wireless Access Point / Client Bridge that operates seamlessly in both 5GHz and 2.4GHz frequency. It features high transmitted output power as well as superior sensitivity. EOC-5610 extends radio coverage, avoids unnecessary roaming between Access Points and ensures a stable wireless connection while reduces the number of required equipments. EOC-5610 supports user friendly interface including distance control (ACK Timeout) ranges from 1KM up to 30KM and RSSI LED indicator offering real time signal status. It also supports PoE injector for convenient outdoor installation. EOC-5610 ensures wireless transmission security with full support of encryption mechanism including 64/128-bit WEP, WPA and WPA2. The design, high performance, and array of features make EOC-5610 a suitable wireless solution for both residence and office

ECB-3500

2010-11-15 21:08:32

ECB3500 is a powerful, enhanced, enterprise level product supports 7 multi-functions to operate for every kind of working environment. It supports high transmit output power and high data rate which plays different roles of Access Point/ Client Bridge / Repeater / WDS AP / WDS Bridge / Client Router / AP Router. It operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and super high speed of 802.11g (2.4GHz, 108Mbps) wireless standards. It supports different output power level settings, bandwidth selection, and RSSI indicator which enables the best transmitting and receiving signal for traffic communication. For more sensitive security requirements, ECB3500 can encrypt all wireless transmissions through WEP data encryption and WPA/WPA2. ECB3500 also supports IEEE 802.1x Supplicant function in CB mode, and authenticator in AP mode. Those are the enhanced securities in AP/CB mode. The MAC address filter lets you select any stations should have access to your network. The User isolation function could protect the private network between client users. Normally, ECB3500 has mighty security function for your network safety

EAP-3660

2010-11-15 21:07:07

The EAP-3660 is a smoke detector looking Wireless Access Point / Universal Repeater / WDS that operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and Super high speed of 802.11g (2.4GHz, 108Mbps) wireless standards. It\'s the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation. EAP-3660 features high transmitted output power and high receivable sensitivity along with antenna diversity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment. To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users. The attractive design, high performance, and array of features make EAP-3660 a suitable wireless solution for your residence or office.

EAD-2407

2012-03-19 21:52:15

EAD-2407 This compact 2.4GHz omni directional "rubber-duck" WiFi antenna provides broad coverage and 7 dBi gain. It is a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b and 802.11g wireless LANs, This flexible antenna features a tilt-and-swivel reverse-polarity SMA connector, allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points and radios that are equipped with reverse-polarity SMA connectors. Suitable for EUB-362 EXT and ESR-1220

EUB-362 EXT

2012-03-05 12:37:59

The USB 2.0 wireless card supporting 802.11b/g (2.4GHz) radio operation. It provides high-speed wireless connection with data rate up to 108Mbps. The shirking dimension, light weight & lower power consumption design can easily integrate into a wide range of OEM/ODM device EUB-362(EXT) has high power and high sensitivity. Further, it provides an external antenna which can easily advance your distance and performance more flexible. To protect your wireless connectivity, the high-speed wireless USB adapter can encrypt all wireless transmissions through 64/128/152-bit WEP data encryption and also supports WPA. With the high-speed wireless USB adapter, you will experience the best wireless connectivity available

EOC-1650

2012-03-05 12:23:50

EOC1650 is a revolutionary product consists of conciseness, quality, and flexibility. It comes with 7dBi internal antenna and upgradable SMA interface provides a customizable interface for enhanced network coverage. Attached suction cup allows quick installation on window or smooth surface. Operation mode provides Access Point / Client Bridge /Client Router and high bandwidth up to 54Mbps. It features high transmitted output power and high receivable sensitivity. High output power and high sensitivity extends range and coverage to reduce the roaming between Access Points to ensure a stable wireless connection and reduce the expense of equipment. It supports distance control ranges from 1km to 30km and RSSI indicator which enables the best transmitted and received signals for traffic communication. User can choose a suitable antenna for flexible application. This product comes with PoE injector for building in outdoor environment easily. To protect wireless connectivity, EOC1650 encrypt wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.

EUB-862

2012-03-05 12:37:41

The USB 2.0 wireless card supporting dual-band 802.11a/b/g (2.4GHz & 5GHz) radio operation. It provides high-speed wireless connection with data rate up to 108Mbps. EUB-862 EXT2 has high power and high sensitivity. It can advance your distance and performance. To protect your wireless connectivity, the high-speed wireless USB adapter can encrypt all wireless transmissions through 64/128/152-bit WEP data encryption and also supports WPA and WPA2. Dynamic Frequency Selection (DFS) puts your network on the cleanest channel in your location. With the High-Speed Wireless USB Adapter, you will experience the best wireless connectivity available

IA/MP1

2012-03-19 21:35:48

MikroTik RouterBOARD 11 miniPCI to PCI adapter is an adapter for 3.3v miniPCI to PCI standard sockets. The adapter is provided in PCI card form with an integrated miniPCI slot that allows you to use miniPCI cards in standard PCI sockets

IN/G44V

2012-03-17 19:30:07

Mikrotik IN/G44V RouterBOARD 44GV PCI 4-port Gigabit Ethernet adapter (VIA VT6122 Chipset) Four 10/100/1000Mbit ports. MDI/X: cross/straight cable autodetection. Standards support of IEEE 802.2 10BaseT, IEEE 802.3u 100BaseTX Fast Ethernet, Vlan 802.1q. OS Support from RouterOS, Linux, BSD, and Windows. Power consumption 8 watts.

CA/411

2012-03-21 23:00:37

CA411 indoor equipment case, ETHERNET HOLE, USED WITH RB/133C & RB/411 WITH ONE

CA-433U

2012-03-21 23:00:07

CA433U indoor equipment case, FOR USB, USED WITH RB333/RB433 WITH HOLES

CA/333

2012-03-21 22:56:40

CA333 indoor equipment case, USED WITH RB/333

CA/150

2012-03-21 22:56:11

CA150 indoor equipment case, USED WITH RB/150

R52n

2012-03-17 19:29:19

Key Features and Benefits• Dual band IEEE 802.11a/b/g/n standard• Output Power of up to 25dBm @ b/g/n Band• Support for up to 2x2 MIMO with spatial multiplexing• Four times the throughput of 802.11a/g• Atheros AR9220, chipset• High Performance (up to 300Mbps physical datarates and 200Mbps of actual user throughput) withLow Power Consumption• 2 X U.FL Antenna Connector

RB493AH

2012-03-17 19:26:37

Mikrotik RouterBOARD 493AH with 680MHz Atheros AR7161 Network Processor (overclock to 800MHz), 128MB RAM, 9 10/100 ethernet ports, 3 miniPCI slots, 64MB NAND with RouterOS L5. Supports POE on ether1: 10 to 28vdc on unused pairs (no power over datalines), or 10-28vdc power jack support. Overall dimensions: 155mm x 105mm (6.10in x 4.13in

RB493

2012-03-17 19:32:47

The RB493 has nine ethernet ports andthree miniPCI slots, it also has a switchchip, so the ethernet ports of your choicecan be grouped together to make it act asa switch.The heart of this device is a newgeneration Atheros CPU, adding thisdevice to the already successful RB400product range.

RB450G

2012-03-17 19:35:40

The RB450G is a five port Gigabit ethernetrouter. Comparing to the RB450, theRB450G not only adds Gigabit speedcapability, but also 256Mb of RAM, afaster CPU and a microSD card slot for filestorage.

RouterBoard RB 433 UAH

2012-03-17 19:34:36

RB433UAH MikroTik is proud to announce the RB433UAH, with two USB 2.0 ports to expand storage, add 3G wireless modems and other devices. Combined with the 680MHZ Atheros CPU of RB433AH and expanded NAND storage (512MB), this is the most universal routerboard in the RB400 series.

ANT2400Q9

2012-03-19 21:51:18

2.4GHz 9dBi Rubber Duck AntennaModel ANT2400Q9Freq. Range 2400-2483.5 MHzBandwidth 83.5 MHzGain 9 dBiV.S.W.R <2Nominal Impedance 50 ohmPolarization VerticalMax Power 50WConnector RP-SMA or CustomizationHeight 380Radome Material PlasticAntenna Color BlackWorking Temperature -40m to 55m

ANT2327D14

2012-03-21 21:53:27

Wimax Panel AntennaModel ANT2327D14Freq. Range 2300-2700 MHzBandwidth 400MHzGain 14dBiHorizontal Beamwidth 30Vertical Beamwidth 30F/B 25dBVSWR <1.5 Type; <2.0MaxNominal Impedance 50Polarization Horizontal or VerticalMax Power 50 WConnector N FemaleDimension 190x190x30mmWeight <1 kg

AWDS-R02

2012-03-21 21:38:42

AWDS-R02 Wireless Router is a high-performace Router with the built-in ADSL modem can support ADSL link downstream up to 24Mbps and up stream up to 2Mbps. The four port 10/100Mbps switch can let user link up to 4 pcs or laptops to share the internet connection. The advanced firewall features can protect the attacking via Internet. The web user interface can help user to manage or set up the router very easy. Integrated with wireless AP which supports IEEE 802.11b/g wireless standard user can easy to connect to the router via wireless and enjoy the internet gaming at any place of his home.